Kürzlich gesucht

    Microchip Atmel-ICE Debugger, Entwicklungskit, Mikrocontroller SAM, AVR

    RS Best.-Nr.:
    130-6124
    Herst. Teile-Nr.:
    ATATMEL-ICE-PCBA
    Marke:
    Microchip
    Microchip
    Diese Kategorie anzeigen
    9 Lieferbar innerhalb von 3 Werktagen.
    11 weitere lieferbar innerhalb von 6-8 Werktagen.
    Add to Basket
    Stück

    Im Warenkorb

    Preis pro Stück

    CHF.101.477

    StückPro Stück
    1 +CHF.101.477
    RS Best.-Nr.:
    130-6124
    Herst. Teile-Nr.:
    ATATMEL-ICE-PCBA
    Marke:
    Microchip

    Mehr Infos und technische Dokumente


    Rechtliche Anforderungen


    Produktdetails

    ATATMEL-ICE PCBA


    The Atmel-ICE series consists of development tools for debugging and programming ARM Cortex-M based Atmel SAM and Atmel AVR microcontrollers with on-chip debug capability. The Atmel-ICE series supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces and is compatible with Atmel Studio.


    Kit Contains:


    • Atmel-ICE unit without plastic encapsulation

    130-6122 Full Kit available

    130-6123 Basic Kit available


    System Requirements


    The Atmel-ICE unit requires that a front-end debugging environment Atmel Studio version 6.2 or later is installed on your computer. The Atmel-ICE should be connected to the host computer using the USB cable provided, or a certified Micro-USB cable.


    How to turn the Atmel - ICE on?

    The Atmel-ICE is powered by the USB bus voltage. It requires less than 100mA to operate, and can, therefore, be powered through a USB hub. The power LED will illuminate when the unit is plugged in. When not connected in an active programming or debugging session, the unit will enter low-power consumption mode to preserve your computer's battery. The Atmel-ICE cannot be powered down - it should be unplugged when not in use.

    How does it connect?

    The Atmel-ICE communicates primarily using a standard HID interface and does not require a special driver on the host computer. The Atmel-ICE must be connected to an available USB port on the host computer using the USB cable provided, or suitable USB certified micro cable. The Atmel-ICE contains a USB 2.0 compliant controller and can operate in both full-speed and high-speed modes. For best results, connect the Atmel-ICE directly to a USB 2.0 compliant high-speed hub on the host computer using the cable provided.


    Montagesatz


    Kabelsatz 177-9591
    Adaptersatz 177-9590
    Basis-Kit: 130-6123
    PCBA-Kit: 130-6124
    Vollständiges Kit: 130-6122



    Technische Daten

    EigenschaftWert
    Zubehör-TypEntwicklungskit
    Zum Einsatz mitMikrocontroller SAM, AVR
    InterfaceJTAG, SWD, PDI, TPI, aWire, SPI, debugWIRE, UPDI
    Name des ProgrammierersAtmel-ICE
    9 Lieferbar innerhalb von 3 Werktagen.
    11 weitere lieferbar innerhalb von 6-8 Werktagen.
    Add to Basket
    Stück

    Im Warenkorb

    Preis pro Stück

    CHF.101.477

    StückPro Stück
    1 +CHF.101.477