onsemi Operationsverstärker Operationsverstärker SMD R-R TSOP, einzeln typ. 1,8 → 5,5 V, 5-Pin AEC-Q100
- RS Best.-Nr.:
- 178-4672P
- Herst. Teile-Nr.:
- NCS333ASN2T1G
- Marke:
- onsemi
Voraussichtlich ab 01.08.2024 zur Lieferung verfügbar. Lieferung erfolgt innerhalb von 6-8 Werktagen.
Im Warenkorb
Preis pro Stück (auf Rolle) Bestellmengen unter 150 Stück auf Gurtabschnitt
CHF.0.263
Stück | Pro Stück |
10 + | CHF.0.263 |
- RS Best.-Nr.:
- 178-4672P
- Herst. Teile-Nr.:
- NCS333ASN2T1G
- Marke:
- onsemi
Mehr Infos und technische Dokumente
Rechtliche Anforderungen
- Ursprungsland:
- MY
Produktdetails
The NCS333 family of high precision op amps feature very low input offset voltage and near−zero drift over time and temperature. These low quiescent current amplifiers have high impedance inputs with a common−mode range 100 mV beyond the rails as well as rail−to−rail output swing within 50 mV of the rails. These op amps operate over a wide supply range from 1.8 V to 5.5 V.
Amplifies small differential voltages with better output accuracy
Better accuracy over temperature
Better output accuracy with lower noise
Low power consumption suited for battery powered devices
Wide supply voltage compatible with a variety of applications
Wide input and output signal range
Better accuracy over temperature
Better output accuracy with lower noise
Low power consumption suited for battery powered devices
Wide supply voltage compatible with a variety of applications
Wide input and output signal range
Technische Daten
Eigenschaft | Wert |
---|---|
Verstärker-Typ | Operationsverstärker |
Montage-Typ | SMD |
Gehäusegröße | TSOP |
Stromversorgungs-Typ | Single |
Anzahl der Kanäle pro Chip | 1 |
Pinanzahl | 5 |
Versorgungsspannung einzeln typ. | 1,8 → 5,5 V |
Verstärkungsbandbreitenprodukt typ. | 350kHz |
Ausgangs-Typ | Rail-to-Rail |
Flankensteilheit typ. | 0.15V/µs |
Arbeitsfrequenz max. | 1 kHz |
Betriebstemperatur min. | –40 °C |
Betriebstemperatur max. | +125 °C |
Ausgangsstrom | 25 mA |
Automobilstandard | AEC-Q100 |
Eingangsspannung max. | 5,5 V |
Offset Spannung | 10µV |
Spannungsverstärkung typ. | 145 dB |
Breite | 1.65mm |
Höhe | 1mm |
Eingangsspannung Bereich | 1,8 → 5,5 V |
Eingansspannungsrauschen typ. | 62nV/√Hz |
Abmessungen | 3.15 x 1.65 x 1mm |
Offset-Eingangsstrom | 400pA |
Länge | 3.15mm |
Eingangsspannung min. | 1,8 V |