Microchip WLAN-Modul 2.7 V WPA, WPA2, WEP IEEE 802.11 b/g/n
- RS Best.-Nr.:
- 177-9622
- Herst. Teile-Nr.:
- ATWINC1510-MR210PB1952
- Marke:
- Microchip
Abbildung stellvertretend für Produktreihe
Zwischensumme (1 Stück)*
CHF.7.466
Nur noch Restbestände
- Letzte 31 Einheit(en) versandfertig von einem anderen Standort
Stück | Pro Stück |
|---|---|
| 1 + | CHF.7.47 |
*Richtpreis
- RS Best.-Nr.:
- 177-9622
- Herst. Teile-Nr.:
- ATWINC1510-MR210PB1952
- Marke:
- Microchip
Technische Daten
Mehr Infos und technische Dokumente
Rechtliche Anforderungen
Produktdetails
Finden Sie ähnliche Produkte, indem Sie ein oder mehrere Eigenschaften auswählen.
Alle auswählen | Eigenschaft | Wert |
|---|---|---|
| Marke | Microchip | |
| Produkt Typ | WLAN-Modul | |
| Unterstützte Sicherheitsstandards | WPA, WPA2, WEP | |
| Ausgangsleistung | 13.6dBm | |
| Frequenz | 2484MHz | |
| Höhe | 2.1mm | |
| Länge | 21.7mm | |
| Schnittstellentyp | SPI | |
| Minimale Versorgungsspannung | 2.7V | |
| Maximale Versorgungsspannung | 2.7V | |
| Breite | 14.7 mm | |
| Unterstützte Protokolle | IEEE 802.11 b/g/n | |
| Betriebstemperatur min. | -40°C | |
| Maximale Betriebstemperatur | 85°C | |
| Serie | ATWINC1510 | |
| Normen/Zulassungen | No | |
| Alle auswählen | ||
|---|---|---|
Marke Microchip | ||
Produkt Typ WLAN-Modul | ||
Unterstützte Sicherheitsstandards WPA, WPA2, WEP | ||
Ausgangsleistung 13.6dBm | ||
Frequenz 2484MHz | ||
Höhe 2.1mm | ||
Länge 21.7mm | ||
Schnittstellentyp SPI | ||
Minimale Versorgungsspannung 2.7V | ||
Maximale Versorgungsspannung 2.7V | ||
Breite 14.7 mm | ||
Unterstützte Protokolle IEEE 802.11 b/g/n | ||
Betriebstemperatur min. -40°C | ||
Maximale Betriebstemperatur 85°C | ||
Serie ATWINC1510 | ||
Normen/Zulassungen No | ||
- Ursprungsland:
- TW
Microchip's ATWINC1500 is an 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The ATWINC1500 connects to any SAM or PIC MCU with minimal resource requirements. The ATWINC1500's most advanced mode is a single stream 1x1 802.11n mode. The ATWINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI.
Single-band 2.4GHz b/g/n IoT Network Controller
Extreme low power
Operating voltage: 3.0V to 4.2V
Serial host interface: SPI
Security protocols supported: WPA/WPA2 Personal, TLS, SSL
Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
Integrated into Atmel Studio 7 - See ASF release notes
Atmel Software Framework (ASF) Free Software download available
Small form factor module measures just 21.7 x 14.7mm
Verwandte Links
- Microchip WLAN-Modul WEP, WPA, WPA2 SPI 2.7 to 3.6V 21.7 x 14.7 x 2.1mm
- Microchip WLAN-Modul WEP, WPA, WPA2 SDIO, SPI 1.8 to 3.6V 21.7 x 14.7 x 2.1mm
- Microchip WLAN-Modul WEP, WPA, WPA2 SDIO, SPI 3 to 3.6V 22.4 x 14.7 x 2mm
- Ezurio WLAN-Modul WEP, WPA, WPA2 3 - 3.6V 15.5 x 21 x 2mm
- Microchip WLAN-Modul 802.11b / g / n 3 → 3.6V 21.7 x 14.7 x 2.1mm
- Microchip WLAN-Modul 802.11b / g / n 1.8 → 3.6V 21.7 x 14.7 x 2.1mm
- Ezurio BLE/WLAN-Modul WEP, WPA, WPA2 3.2 - 3.6V 15.6 x 21 x 2.32mm
- Ezurio WLAN-Modul WEP, WPA, WPA2 UART 3.3V 22 x 30 x 3.3mm
