- RS Best.-Nr.:
- 169-0204
- Herst. Teile-Nr.:
- SI8920BC-IP
- Marke:
- Skyworks Solutions Inc
Voraussichtlich ab 12.06.2024 zur Lieferung verfügbar. Lieferung erfolgt innerhalb von 6-8 Werktagen.
Im Warenkorb
Preis pro Stück (In einer Stange von 50)
CHF.3.203
Stück | Pro Stück | Pro Stange* |
50 + | CHF.3.203 | CHF.160.178 |
*Bitte VPE beachten |
- RS Best.-Nr.:
- 169-0204
- Herst. Teile-Nr.:
- SI8920BC-IP
- Marke:
- Skyworks Solutions Inc
Mehr Infos und technische Dokumente
Rechtliche Anforderungen
- Ursprungsland:
- TH
Produktdetails
Si8920 Isolierter Verstärker für Strom-Shunt-Messung
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Der Si8920 ist in 4 Varianten erhältlich:
Si8920AC-IP (RS-Best.-Nr. 901-3967) mit einem Eingangsbereich von ±100 mV in einem SMD-Anschlusspins-DIP-8-Gehäuse
Si8920BC-IP (RS-Best.-Nr. 901-3976) mit einem Eingangsbereich von ±200 mV in einem SMD-Anschlusspins-DIP-8-Gehäuse
Si8920AD-IS (RS-Best.-Nr. 901-3979) mit einem Eingangsbereich von ±100 mV in einem SOIC-16-Gehäuse
Si8920BD-IS (RS-Best.-Nr. 901-3973) mit einem Eingangsbereich von ±200 mV in einem SOIC-16-Gehäuse
Si8920AC-IP (RS-Best.-Nr. 901-3967) mit einem Eingangsbereich von ±100 mV in einem SMD-Anschlusspins-DIP-8-Gehäuse
Si8920BC-IP (RS-Best.-Nr. 901-3976) mit einem Eingangsbereich von ±200 mV in einem SMD-Anschlusspins-DIP-8-Gehäuse
Si8920AD-IS (RS-Best.-Nr. 901-3979) mit einem Eingangsbereich von ±100 mV in einem SOIC-16-Gehäuse
Si8920BD-IS (RS-Best.-Nr. 901-3973) mit einem Eingangsbereich von ±200 mV in einem SOIC-16-Gehäuse
Stromerfassungsverstärker haben einen Spannungsausgang, der proportional zum Spannungsabfall über einen Widerstand mit sehr niedrigem Wert ist, üblicherweise auf einer Starkstromschiene. Auf diese Weise messen sie den in dieser Stromschiene fließenden Strom.
Technische Daten
Eigenschaft | Wert |
---|---|
Stromversorgungs-Typ | Single |
Versorgungsspannung einzeln typ. | 3 → 5,5 V |
Anzahl der Kanäle pro Chip | 2 |
Ausgangs-Typ | Differential |
Versorgungsstrom max. | 5,5 mA |
Montage-Typ | THT |
Gehäusegröße | DIP |
Pinanzahl | 8 |
Abmessungen | 9.9 x 6.6 x 3.44mm |
Höhe | 3.44mm |
Länge | 9.9mm |
Arbeitsspannnung max. | 5,5 V |
Betriebstemperatur max. | +125 °C |
Betriebstemperatur min. | –40 °C |
Breite | 6.6mm |
Arbeitsspannnung min. | 3 V |
- RS Best.-Nr.:
- 169-0204
- Herst. Teile-Nr.:
- SI8920BC-IP
- Marke:
- Skyworks Solutions Inc